![plexamp linux plexamp linux](https://stadt-bremerhaven.de/wp-content/uploads/2020/04/plexamp-1.jpg)
- #Plexamp linux how to
- #Plexamp linux install
- #Plexamp linux update
- #Plexamp linux software
- #Plexamp linux password
in the area, change Type=forking to Type=simple.If it says 3.3.5 or higher, the bug is already fixed, if you are running an older version you can either compile shairport-sync for yourself or change the way shairport-sync starts ( see this issue on GitHub for details): open /lib/systemd/system/rvice in an editor and change the following lines: There may be a small bug that prevents shairport-sync from starting automatically run shairport-sync -V and check the output. If you have problems, have a look at the shairport-sync GitHub page. Now you should be able to see the client in the AirPlay device selection dialog on an iOS device. Run sudo systemctl enable shairport-sync to start shairport-sync automatically when booting, and then sudo systemctl start shairport-sync to start the AirPlay client. In the sessioncontrol area, remove the // in front of allow_session_interruption = "no" and change the no to yes, if you want to be able to allow another device to interrupt playing. In the general area, remove the // in front of name = "%H" and change %H to a name of your choice this is the name that will appear in the AirPlay client select screen of your iOS device.
#Plexamp linux install
To install it, run sudo apt install shairport-sync -y this will install an older version, which is good enough, but if you want to run the newest version you can follow these instructions.Īfter installing, open the config file /etc/nf in an editor of your choice, for example in nano by running sudo nano /etc/nf (in nano, you can press + and then to close and save the changes you made). We use shairport-sync as a AirPlay client. If you have problems, have a look at the raspotify GitHub page. Now you should be able to open Spotify on another device and connect to this new Spotify Connect client. If you use a firewall on your pi, you may want to open some ports for Spotify Connect to work correctly see this post for details.
#Plexamp linux password
This is not required, your device will be visible to all devices in your wifi running Spotify by default, but if you add your username and password you can also access your device over the internet.Īfter changing and saving the options file, restart raspotify by typing sudo systemctl restart raspotify You can also remove the # in front of OPTIONS and add your username and password. If you want to use wifi, add a text file called wpa_nf in the /boot partition with the following content: ctrl_interface=/ var/run/wpa_supplicant update_config= 1 country=" (removed the # at the beginning and change the name this is what the device will be called in Spotify) Mount the sd-card and add an empty file called ssh to the /boot partition so that the ssh server will be enabled at boot We use the lite version, because we want to run our Pi in headless mode without a gui and no monitor or keyboard connected to the piįlash the extracted iso file to an microSD-card (a small 4GB card is enough you could even get away with a 2GB card, but then updating the kernel may be a bit tricky) using Etcher, or another tool
![plexamp linux plexamp linux](https://www.plex.tv/wp-content/uploads/2021/08/enable-library-1440x1049.png)
I'm using a Raspberry Pi Zero W, but any Rasberry Pi should workĭownload the latest Raspberry Pi OS Lite and extract the zip file. use a decent power supply the more expensive your audio shield is, the more expensive the power supply should be.the 3.5mm audio jack and the onboard dac are not that great, so a special dac shield or audio over HDMI is a better solution if you want high quality audio.on a non-zero pi you can use the 3.5mm audio jack, or use the HDMI output directly with a Soundbar or a HDMI to Cinch converter.I used the Allo MiniBoss, the Pimoroni pHAT DAC, the Adafruit I2S Audio Bonnet and the Raspiaudio Audio+. HiFiBerry MiniAmp (when you want to directly drive speakers).There are a lot of audio hats you can use: I'm using a Raspberry Pi Zero W because it is the smallest of the Raspberry Pis, it's cheap and powerful enough.
#Plexamp linux how to
I won't cover those use cases here, but you can find out how to play audio on your own and then jump to 4. Or you can use a Raspberry Pi Zero, with a cheap USB audio adapter, or use audio over HDMI if you connect directly to a soundbar or your TV or something like that. If you want the most low budget solution, use a Raspberry Pi 3 with the onboard audio. Raspberry Pi Zero W with Raspiaudio Audio + 1.
#Plexamp linux update
I may revisit and update this in the future, in the meantime you are on your own.
#Plexamp linux software
This tutorial describes how you can build your own headless player step by step by installing all the software yourself and configure it via the command line. Build your own headless Raspberry Pi audio playerįor a hassle-free solution, have a look at HiFiBerryOS, Volumio, pimusicbox, piCorePlayer, RoPieee or similiar solutions.